Efficiency Heating & Cooling

Efficiency Heating and Cooling Company
Navigation Menu

Heat Pump Installation Services

We Install Heat Pumps for Home & Office

Heat Pump Installation Company

evolution variable speed heat pump model 288BNV

Searching for Heat Pump Installation Near Me?

A heat pump looks similar to an air conditioner, and acts just like one during the summer when you need to cool your home. However, when cooler weather hits Portland, a heat pump can also reverse the cooling process and heat your home! This is done by extracting heat energy from the air outside, and using that to warm the air inside. Even when outside air is cool, there is still heat energy in it.

Our heat pump experts can help you select the best heat pump system for your property. Contact us today for more information.

More Information

How Heat Pump Installations for Homes in the Portland
Metro Area Can Be Energy Efficient With Reduced Emissions

This section gives a brief introduction to heat pumps. Based on six basic facts about heat supply the value of these devices is discussed. It is believed that heat pumps are very energy efficient and a great way to control the internal environment of your home.


Why Install Heating Pumps as an Efficient Technology

Heat pumps offer the most energy-efficient way to provide heating and cooling in many applications, as they can use renewable heat sources in our surroundings. Even at temperatures we consider to be cold, air, ground, and water contain useful heat that’s continuously replenished by the sun.

By applying a little more energy, a heat pump can raise the temperature of this heat energy to the level needed. Similarly, they can also use waste heat sources, such as from industrial processes, cooling equipment or ventilation air extracted from buildings. A typical electrical heat pump will just need 100 kWh of power to turn 200 kWh of freely available environmental or waste heat into 300 kWh of useful heat.



Six basic facts about heating

Through this unique ability, this technology can radically improve the energy efficiency and environmental value of any heating system that is driven by primary energy resources such as fuel or power. The following six facts should be considered when any heat supply system is designed:

  1. direct combustion to generate heat is never the most efficient use of fuel
  2. more efficient because they use renewable energy in the form of low-temperature heat
  3. if the fuel used by conventional boilers were redirected to supply power for electric heat pumps, about 35-50% less fuel would be needed, resulting in 35-50% less emissions
  4. around 50% savings are made when electric heat pumps are driven by CHP (combined heat and power or cogeneration) systems
  5. whether fossil fuels, nuclear energy, or renewable power is used to generate electricity, electric heat pumps make far better use of these resources than do resistance heaters
  6. the fuel consumption, and consequently the emissions rate, of an absorption or gas-engine heat pump is about 35-50% less than that of a conventional boiler



A large and worldwide potential

If it is further considered that heat pumps can meet space heating, hot water heating, and cooling needs in all types of buildings, as well as many industrial heating requirements, it is clear that these devices have a large and worldwide potential.

Of the global CO2 emissions that amounted to 22 billion tonnes in 1997, heating in building causes 30% and industrial activities cause 35%. The potential CO2 emissions reduction with heat pumps is calculated as follows:

  • 6.6 billion tonnes CO2 comes from heating buildings (30% of total emissions).
  • 1.0 billion tonnes can be saved by residential and commercial heat pump installation, assuming that they can provide 30% of the heating for buildings, with an emission reduction of 50%.

The total CO2 reduction potential of 1.2 billion tonnes is about 6% of the global emissions! This is one of the largest that a single technology can offer, and this technology is already available in the marketplace. And with higher efficiencies in power plants as well as for the heat pump itself, the future global emissions saving potential is even 16%.

In some regions of the world, heat pump installation already plays an important role in energy systems. But if this technology is to achieve more widespread use, a decisive effort is needed to stimulate heat pump markets and to further optimize the technology. It is encouraging that a number of governments and utilities are strongly supporting heat pumps.

In all cases, it is important to ensure that both heat pump applications and policies are based on a careful assessment of the facts, drawn from as wide an experience base as possible. The IEA Heat Pump Center sees it as one of its key roles to ensure that these facts are available to a wide audience, including policymakers, utilities, market parties, and heat pump users.



What Are the Advantages of a Heat Pump System?

There are several advantages to a heat pump system. These advantages will depend on the type of home you have and the climate it is located in. For example, a heat pump works great in the summer because it is able to provide warmth to your house. However, a heat pump is not efficient in cold weather.

What is the downside to installing a heat pump?

Heat pump installation can be a useful way to keep your home warm and cool. They may be less expensive to operate than conventional systems. However, they also have their drawbacks. For example, a heat pump won’t work during a power outage.

A heat pump is a complicated technology that needs to be installed properly. Its components can break down or become damaged in cold climates. This can affect its efficiency.

Efficient heat pump installation can provide more than 100 percent of your home’s heating needs. Some units have zone controls for optimum usage.

Using a heat pump can save you hundreds of dollars in energy bills. Unlike natural gas, they don’t leak carbon monoxide into the air. You can also run a backup generator to keep your heat pump running during a power outage.

As far as the heating industry is concerned, the latest advancements in technology are vital to reduce energy costs and the heat pump cost is quite minimal over the course of time. These include the heat pump, solar panels, wind turbines, and other clean energy technologies.

There are two main types of heat pumps: air source and ground source. Air source models typically have automatic defrosting systems.

Compared to a gas furnace, a heat pump is also more energy efficient. Typically, you can expect a savings of around 35% to 50% of your total heating bill. Depending on your climate, you can choose from a variety of options to best suit your lifestyle.

If you don’t want to pay for the installation, you can purchase a pre-installed system for as little as $5,000.

A heat pump is a great choice for allergy sufferers, asthmatics, and those who are looking for a more cost-effective way to heat and cool their home.

Is having a company install a heat pump system worth it?

If you are looking to make your home more energy efficient, a heat pump system may be just what you need. Whether you live in a small one-bedroom apartment or a multi-level house, you may be able to save a lot of money in the long run.

However, a heat pump doesn’t come cheap. The upfront heat pump cost can range from a few thousand to tens of thousands. In addition to the price tag, you will also have to make some significant alterations to your home.

Compared to a furnace, a heat pump can keep your home cool without burning any fuel. Plus, it can help you cut your gas bill.

Heat pump installation helps to dehumidify homes

A heat pump also helps to dehumidify your home. This is important since cold air is more likely to condense in the dead of winter.

An average home might see a savings of roughly $500 per year by installing a new heat pump. While this number will vary depending on the climate and your home’s location, it’s certainly a good starting point.

To get the most out of your heat pump, it’s important to choose the right one. That means doing some research before you buy. Some things to consider include your home’s layout and the types of heating and cooling system and duct system, and gas line setup you currently have.

Also, you should look into a heat pump’s efficiency rating and ask home comfort specialists about the differences. Many models offer variable-speed controls, which allow you to adjust your comfort level.

Finally, you should find out if your local government offers any incentives for the installation of a heat pump. It’s possible you can qualify for rebates or free upgrades.

What is the average cost of a heat pump system?

The cost of a heat pump installatio can vary widely depending on where you live. Some locations, such as the Northeast and West, are more dependent on fossil fuels and thus are more expensive to install.

If you are looking to install a new heat pump system in your home, you may want to consider a high-efficiency model. These systems have the highest efficiency ratings and can save you the most money on your energy bills.

A basic heat pump system for a 2,000 square foot house will cost roughly $15,000 to $20,000, while a larger system can cost more than $30,000. The size of your house and your home’s climate can also impact your heat pump cost.

Heat pumps are available in two-stage or single-stage models. In both cases, your heat pump will use a duct system to move warm air from the outside to your home.

Average cost for heat pump installation

The average heat pump cost of installing a 3-ton heat pump ranges from $4,500 to $8,000. You can get a more affordable heat pump unit if you have ductwork already installed in your home. For example, you might spend about $1,800 to $2,300 on ductwork if you have an existing, unfinished basement.

Another factor that affects heat pump installation costs is the number of zones you have in your home. You will also need to have a licensed HVAC contractor perform a heat gain and heat loss calculation. This will require the company to inspect your attic, windows, and other areas of your home.

The final price for a new heat pump depends on the brand, type, and quality of the HVAC system. Many manufacturers offer a wide variety of units at different prices.

At what temperature is a heat pump useless?

If you’re considering a heat pump for your home or office, you might be wondering just what temperature it’s useless at. The fact is that a heat pump does not perform well below 25 degrees F.

However, if you’re lucky enough to live somewhere in the upper half of the Fahrenheit scale, the cost of your electric bill can be a thing of the past. A heat pump paired with a good old fashioned furnace is a worthy combo. In addition to the heat, a backup heating system will keep you warm when the heat pump goes on the fritz.

To figure out the actual temperature required for your heat pump technology to be usable, you will need to consult a local utility provider to map out your electric bill and determine what’s needed and what’s not. Once you know your numbers, you can start planning out your heat pump’s future. Fortunately, there are a number of choices, from traditional to greener alternatives, to help you along the way.

Ultimately, the best way to save on your heating and cooling bill is to make sure you’re getting the best combination of technology and service. By doing so, you can be assured that your money is being spent on the most energy efficient products, and that your home or office is safe from a chilly fate. Keeping your new heat pump in top condition by scheduling rutine revies by HVAC contractors will be sure to reduce your costs for years to come.

Lastly, don’t forget to take advantage of free heating and cooling incentives available to residents and businesses alike. It’s never too early to plan for the chilly season ahead of time.

What is the typical lifespan of a heat pump?

Heat pumps are a great way to keep your home cool in the summer and warm in the winter. These systems can last up to 20 years, depending on the type, frequency of use and maintenance. However, they can be quite expensive. If you are in the market for a new heating and cooling system, you should research the average lifespan of heat pumps.

One major factor in determining the life of a heat pump is the climate. Coastal areas, where salt in the air is more prevalent, will degrade your equipment faster. In addition, the heat pump will have to work harder to achieve the desired temperature. Colder winters will also lengthen the time the system is in operation.

Another important factor is the level of maintenance performed by HVAC contractors. Regular service is necessary to maximize the lifespan of your heat pump. While the cost of such services can be daunting, they are essential. Keeping your heat pump in good working order can increase its lifespan by two or three years.

Another factor to consider is the manufacturer. The more reliable the brand, the longer it can be expected to perform. Moreover, only registered heat pumps and factory certified installers are covered by a warranty.

You should also consider the location of your home. Coastal and desert areas are less likely to enjoy a long lifespan.

Other factors that affect the lifespan of a heat pump include the use of refrigerant and the quality of the indoor environment. A well-maintained unit can last up to twenty or twenty-five years. Those that have been properly installed will also have a higher lifespan.

Heat pumps are a great investment, but you should plan ahead and expect to replace them at least every 15 to 20 years. This will help you avoid paying too much for a system that will only last a decade.


How to Choose Among the Heat Pump Installation Comapnies in Portland, Oregon?

Heat pumps are an efficient and cost-effective way to heat and cool your home, but finding a quality heat pump services company is crucial to ensuring that your system is installed and maintained properly. In the Portland, Oregon area, there are several factors to consider when choosing a heat pump services company.

  1. Certification and Licensing: It is important to choose a company that is properly certified and licensed to work on heat pumps in your area. In Portland, this includes having a current Oregon Construction Contractors Board (CCB) license and a Refrigeration/Air Conditioning Certificate from the Oregon Department of Environmental Quality (DEQ).
  2. Experience: Look for a company with a track record of experience in the heat pump industry. A company with a long history of working on heat pumps is more likely to have the knowledge and skills needed to properly install and maintain your system.
  3. Customer Reviews: Check online review sites and ask for references from the heat pump services company you are considering. Positive customer reviews and word-of-mouth recommendations can be a good indication of the quality of the company’s work.
  4. Product Knowledge: Make sure the company you choose is knowledgeable about the different types of heat pumps and can help you choose the right system for your home. They should also be able to explain the features and benefits of different models and help you understand the costs and savings associated with each option.
  5. Maintenance and Repair Services: A quality heat pump services company should offer ongoing maintenance and repair services to keep your system running smoothly. This includes cleaning and servicing the heat pump as needed, as well as being available for emergency repairs when necessary.
  6. Energy Efficiency: Choosing a heat pump that is energy efficient can help you save money on your energy bills in the long run. Look for a company that offers energy-efficient models and can help you understand the energy savings associated with different heat pump options.
  7. Price: While price should not be the only factor in choosing a heat pump services company, it is important to consider the cost of installation, maintenance, and repairs. Look for a company that offers competitive pricing and be sure to get quotes from multiple companies before making a decision.
  8. Warranty: Make sure the heat pump services company you choose offers a good warranty on the heat pump and its installation. A longer warranty period can provide added peace of mind and protection for your investment.

By considering these factors, you can be confident that you are choosing a quality heat pump services company in the Portland, Oregon area. Proper installation and maintenance of your heat pump can help ensure that your system is efficient and effective for years to come.

Click to Call: 503.698.5588

We Strive to Be One of the Best Local HVAC Companies in the Area!

Efficiency Heating & Cooling offers Heating services and Cooling services. The focus of our HVAC services encompasses: Air Conditioning, Heat Pump repairs, Ductless Mini-Splits, Water Heaters, and Furnace installations, repair, service, replacement, and maintenance.

Efficiency Heating & Cooling employs only the qualified technicians for heat pump repair, air conditioner repair, repair furnace, and ductless mini split repairs. We service and replace all air conditioners, furnaces, and water heaters.

Contact us now with any questions or to schedule and appointment!

We Strive to Be One of the Best Local
HVAC Companies in the Area!

Efficiency Heating & Cooling offers Heating services and Cooling services. The focus of our HVAC services encompasses: Air Conditioning, Heat Pump repairs, Ductless Mini-Splits, Water Heaters, and Furnace installations, repair, service, replacement, and maintenance.

Efficiency Heating & Cooling employs only the qualified technicians for heat pump repair, air conditioner repair, repair furnace, and ductless mini split repairs. We service and replace all air conditioners, furnaces, and water heaters.

Contact us now with any questions or to schedule and appointment!

Click to Call: 503.698.5588

Our Locations

14913 SE Kellogg Ave
Milwaukie, OR 97267, USA

Connect With Us

Hours:   Mon – Fri: 7AM – 5PM
Sat – Sun: by Appointment
CCB# 187834

4409 SE 24th Ave, Suite 35
Portland, OR 97202, USA

Book Now