1,400+ Positive Reviews | NATE Certified | Serving Portland Since 2008

(503) 698-5588

Serving Portland Since 2008

1,400 Five-Star Reviews

NATE Certified Technicians

Family-Owned & Operated

Professional Furnace Installation in Portland

Portland Metro Furnace Installation - Done Right the First Time

Furnace installation covers the sizing, selection, and fitting of a gas or electric forced-air heating system matched to your home's Manual J load calculation. With Portland's 4,400 heating degree days and Oregon's 90% AFUE minimum for new installs, getting the sizing right is the difference between a furnace that runs well and one that fights your house all winter.

Efficiency Heating & Cooling installs Carrier, Bryant, and Lennox furnaces across 34 Portland metro cities. Prices start at $4,000 with Energy Trust rebates up to $800 and federal tax credits available. NATE-certified technicians, 4.9-star rated across 1,400+ reviews since 2008.

4.9(1,400+ reviews)
|
NATE Certified

What Sets Us Apart

  • Starting at $4,000 - Upfront pricing, no surprise add-ons
  • $350-$800 Rebates - Energy Trust of Oregon savings applied
  • Over 1,300 Five-Star Reviews - Portland homeowners keep coming back
  • Same-Week Installation - Fast scheduling, no waiting weeks
  • Bryant Authorized Dealer - Top-tier equipment, factory warranties

🍂 Fall Installation Special – Before the Cold Hits

Smart homeowners install furnaces in October-November, not December-February. Here's why:

Beat the rush: Faster scheduling (often same-week)
Avoid emergency rates: Lower costs, more options
Lock in rebates: $350-$800 before they run out
Test before you need it: Ready before first freeze

⏰ Limited Fall Availability

Call today for same-week installation. Most fall installations completed within 3-5 days.

Furnace Installation Cost in Portland

Furnace installation in the Portland metro runs $4,000 to $8,000. The final number depends on the efficiency rating you choose, BTU sizing for your home, and how much work the install requires. Here's the breakdown:

Standard Efficiency (80% AFUE)

Solid gas furnace, dependable heat output

$4,000-$4,500
Installed
  • • 80% fuel efficiency rating
  • • Single-stage heating
  • • Standard venting required
  • • 10-year parts warranty
MOST POPULAR

High Efficiency (90-95% AFUE)

Cuts energy bills, runs quieter, qualifies for rebates

$4,500-$6,000
Installed
  • • 90-95% fuel efficiency rating
  • • Two-stage or modulating heating
  • • Sealed combustion, PVC venting
  • • Eligible for $350-$800 rebates
  • • 10-year parts warranty

Ultra-High Efficiency (96-98% AFUE)

Top-tier efficiency, rock-bottom operating costs, best-in-class comfort

$6,000-$8,000
Installed
  • • 96-98% fuel efficiency rating
  • • Fully modulating heating control
  • • Ultra-quiet operation
  • • Maximum rebate eligibility ($800)
  • • 10-year parts + lifetime heat exchanger warranty

What Affects Installation Cost?

  • Furnace Size: Larger homes need higher BTU output (60,000-120,000 BTU)
  • Efficiency Rating: Higher AFUE ratings cost more upfront but save long-term
  • Ductwork Condition: Repairs or modifications add $500-$2,000
  • Installation Complexity: Attic or crawlspace access affects labor
  • Permits & Disposal: All permits and old furnace removal included

Looking for a furnace installer nearby? We cover 33 cities across the Portland metro.Find your service area and schedule same-day installation.

Save $1,100-$1,700 with Rebates & Incentives

Portland homeowners have access to solid rebates when upgrading to a high-efficiency furnace:

$350-$800
Energy Trust of Oregon Rebates
Up to $300
NW Natural Gas Utility Rebates
Up to $600
Federal Tax Credits (ENERGY STAR)
0% APR
60 Months Financing (Qualified Buyers)

We handle the rebate paperwork from start to finish and make sure you get every dollar available. Between the incentives and our pricing, you can knock over $1,700 off a new high-efficiency furnace install.

How We Handle Your Furnace Installation

Here's what an install looks like from our end. We've done thousands of these across the Portland metro, and most wrap up in a single day.

1

Professional Load Calculation

We run a Manual J load calculation to pin down the exact heating capacity your home needs. This is how we avoid the two biggest install mistakes: oversizing and undersizing.

  • • Measure home square footage and layout
  • • Assess insulation quality and window efficiency
  • • Account for Portland's climate zone requirements
  • • Recommend optimal furnace size (BTU output)
2

Ductwork Inspection & Preparation

Before we touch the new furnace, we inspect every run of ductwork to make sure it's compatible with the high-efficiency unit going in.

  • • Inspect ductwork for leaks, damage, or restrictions
  • • Test airflow and static pressure
  • • Recommend sealing or modifications if needed
  • • Protect your home with floor coverings and work area prep
3

Safe Old Furnace Removal

We disconnect and pull your old furnace, handling all gas, electrical, and venting connections safely. The old unit leaves with us — disposal's included.

  • • Shut off and disconnect gas supply safely
  • • Disconnect electrical connections
  • • Remove old venting system
  • • Haul away old equipment (disposal included)
4

New Furnace Installation

Our NATE-certified techs set the new furnace to manufacturer specs and Oregon building code requirements.

  • • Position and level new furnace
  • • Connect to existing or new ductwork
  • • Install gas piping with pressure testing
  • • Complete electrical wiring and connections
  • • Install PVC venting for high-efficiency models
  • • Install condensate drain system
5

System Testing & Safety Checks

Before we leave, we run the full battery of tests — combustion analysis, CO check, airflow measurement. We don't sign off until everything checks out.

  • • Start-up and operational testing
  • • Gas pressure and combustion analysis
  • • Carbon monoxide safety testing
  • • Airflow measurement and balancing
  • • Thermostat calibration and programming
  • • Final inspection and permit sign-off
6

Homeowner Training & Documentation

We walk you through your new system — thermostat operation, filter schedule, what to watch for. You'll know how to keep it running right for years.

  • • Demonstrate thermostat operation and programming
  • • Explain filter replacement schedule
  • • Review maintenance recommendations
  • • Provide warranty documentation
  • • Submit rebate paperwork on your behalf
  • • Answer all questions about your new system

Typical Installation Timeline

Standard Installation: 6-10 hours (completed in 1 day)
Complex Installation: With ductwork modifications or electrical upgrades, 1-2 days
Free Estimate: Schedule your in-home assessment today

What You Get with Efficiency Heating & Cooling

NATE-Certified Installers

Every installer holds advanced HVAC certification with ongoing factory training

Bryant Factory Authorized

Factory-backed warranties and access to premium high-efficiency furnaces

17+ Years Serving Portland

Installing furnaces across Portland since 2008 — we know this area

Transparent Pricing

Free in-home estimates with no hidden fees or surprise charges

Proper Load Calculations

Manual J load calculations ensure perfect sizing for efficiency

Satisfaction Guaranteed

We stand behind every install with full parts and labor warranties

Permit & Code Compliant

We pull permits and ensure all work meets Oregon building codes

Safety Testing Included

Carbon monoxide testing and combustion analysis on every install

Signs You Need a New Furnace Installation

Not sure if your furnace has another winter in it? These are the red flags we see most often when a system is on its way out:

Furnace is over 15 years old
Furnaces last 15-20 years on average. Past that point, efficiency drops and breakdowns pile up.
Rising energy bills
If your gas bill keeps climbing but your usage hasn't changed, the furnace is losing efficiency.
Uneven heating throughout home
Hot upstairs, cold downstairs? That points to a failing furnace or one that was never sized right.
Frequent repairs needed
When repair bills add up to half the cost of a new unit, it's time to stop throwing money at the old one.
Strange noises (banging, squealing)
Banging, squealing, or rattling usually means worn bearings, loose belts, or failing motors.
Yellow or flickering pilot flame
A healthy flame burns blue. Yellow or orange means incomplete combustion — possible CO risk.
Excessive dust or poor air quality
Aging furnaces lose their ability to filter air well, pushing dust and allergens through your house.
Difficulty maintaining temperature
If the furnace runs nonstop and still can't hit the thermostat setting on a cold night, it's done.

Experiencing any of these issues?

We'll come out, look at your furnace, run the numbers on your home's heating load, and give you a straight answer on whether it makes more sense to repair or replace. No cost for the assessment.

Matt Rohman

Written by

Matt Rohman

Owner & HVAC Specialist

NATE Certified39+ Years ExperienceOregon CCB #187834

Matt Rohman founded Efficiency Heating & Cooling in 2008, bringing 39 years of hands-on HVAC experience to every project. A Portland native and Benson Polytechnic graduate, Matt personally oversees all major installations and complex repairs.

Furnace Installation FAQs

How much does furnace installation cost in Portland?

In the Portland metro, furnace installation runs $4,000 to $8,000 depending on the efficiency rating (80-98% AFUE), BTU sizing, and how complex the install is. Standard efficiency units (80% AFUE) land at $4,000-$4,500. High efficiency (90-95% AFUE) runs $4,500-$6,000. Ultra-high efficiency (96-98% AFUE) is $6,000-$8,000. Energy Trust of Oregon rebates knock off $350-$800, and federal tax credits add up to $600 more in savings.

What rebates are available for furnace installation in Portland?

Portland homeowners qualify for Energy Trust of Oregon rebates of $350-$800 on high-efficiency furnaces. NW Natural kicks in utility rebates up to $300. Federal tax credits cover up to $600 for ENERGY STAR certified equipment. Stack them all and you're looking at $1,100-$1,700 off your new furnace. We handle all the rebate paperwork for you.

How long does furnace installation take?

Most furnace installs wrap up in a single day — about 6-10 hours. That covers the load calculation, ductwork inspection, pulling the old unit, setting and connecting the new furnace (gas, electrical, venting), full system testing, and walking you through operation. If we need ductwork mods or electrical upgrades, it could stretch to 2 days.

What size furnace do I need for my Portland home?

Sizing depends on square footage, insulation, windows, and Portland's climate zone. Our NATE-certified techs run a Manual J load calculation to nail down the exact BTU output your house needs. Getting this right matters — an oversized furnace short-cycles and wastes energy, while an undersized one can't keep up on cold nights. Most Portland homes (1,500-2,000 sq ft) need 60,000-80,000 BTU.

When should I replace my furnace vs repair it?

Think about replacing if the furnace is past 15 years old, the repair bill is more than 50% of a new unit, breakdowns keep happening, your gas bills are climbing, or some rooms just won't heat right. Modern 90-98% AFUE furnaces cut heating costs 20-40% compared to older equipment. We give honest repair-vs-replace assessments — no one here will push a replacement you don't need.

What's the difference between 80%, 90%, and 95% AFUE furnaces?

AFUE (Annual Fuel Utilization Efficiency) tells you how much fuel actually becomes heat. An 80% AFUE furnace turns 80 cents of every dollar into heat — the other 20 cents goes up the flue. A 95% AFUE unit converts 95 cents. For a Portland house spending $1,000/year on heat, jumping from 80% to 95% AFUE saves about $187 a year. The higher-efficiency models also run quieter, manage humidity better, and qualify for rebates.

Do you offer financing for furnace installation?

We do. Financing options include 0% APR for 60 months on qualifying furnace purchases with approved credit. We also help you stack every available rebate — Energy Trust of Oregon ($350-$800), NW Natural utility rebates (up to $300), and federal tax credits (up to $600). Our team can put together a payment plan that works for your budget.

What's included in your furnace installation service?

Every install covers: Manual J load calculation and sizing, energy efficiency consultation, ductwork inspection and mods if needed, old furnace removal and disposal, new furnace install with all gas and electrical connections, proper venting, full system testing and calibration, thermostat setup, homeowner walkthrough on operation and maintenance, all required permits, 10-year parts warranty, and lifetime heat exchanger warranty.

Are you a licensed and insured HVAC contractor?

Yes, Efficiency Heating & Cooling is fully licensed (Oregon CCB #187834), bonded, and insured. We're a Bryant Factory Authorized Dealer and our technicians are NATE-certified (North American Technician Excellence). We've been serving the Portland metro area since 2008 with Over 1,300 five-star reviews.

What brands of furnaces do you install?

As a Bryant Factory Authorized Dealer, we specialize in Bryant furnaces which offer industry-leading efficiency ratings (up to 98.3% AFUE), whisper-quiet operation, and strong warranties. We also install and service all major furnace brands including Carrier, Trane, Lennox, Rheem, Goodman, and York. We'll help you select the best furnace for your home and budget.

Furnace Installation Near Me - Portland Metro Coverage

We install furnaces in 33 Portland metro cities with same-day quotes and 1-2 day installation timelines.

Our NATE-certified crews work out of three local offices, so we're never far from your neighborhood.

Same-Day Quotes

Free in-home estimates with sizing and pricing, typically scheduled within 24 hours

Local Coverage

Serving all 33 Portland metro cities from Beaverton to Gresham, Milwaukie to Hillsboro

Fast Installation

Most furnace installations completed in 1-2 days, even during peak season

Get a Free Furnace Installation Estimate

We'll come out, measure your home, and give you a quote with all the rebates figured in. NATE-certified technicians, upfront pricing, 100% satisfaction guaranteed.

Our Portland Metro Locations

Portland

4409 SE 24th Ave, Suite 35

Portland, OR 97202, USA

Milwaukie

14913 SE Kellogg Ave

Milwaukie, OR 97267, USA

Happy Valley

8305 SE Monterey Ave #220J

Happy Valley, OR 97086

Licensed
Bonded
Insured
NATE Certified
Family Owned
Financing
Satisfaction
24/7 Service