1,280+ Positive Reviews | NATE Certified | Serving Portland Since 2008

(503) 698-5588

Serving Portland Since 2008

1,280 Five-Star Reviews

NATE Certified Technicians

Family-Owned & Operated

Serving Hillsboro, OR

Hillsboro Furnace Repair for Orenco Station, Tanasbourne & Beyond

When a January freeze pushes your Orenco Station smart thermostat into error mode or the furnace in your Tanasbourne townhouse short-cycles because of HOA venting constraints, you need a heating partner who knows Hillsboro inside and out. Efficiency Heating & Cooling services the cutting-edge homes near Intel as readily as the 1980s Brookwood and Jackson School neighborhoods with aging 80% AFUE furnaces. We understand how multi-level townhomes, sophisticated modulating systems, and mixed-use zoning change the way Hillsboro residents heat their homes.

Hillsboro's climate swings—from damp fall mornings to crisp east wind events—demand reliable heat. The city's blend of smart home-equipped Orenco Station properties, HOA-controlled Tanasbourne townhomes, and established Reedville ranches requires technicians who can handle advanced diagnostics, pressure switch readings, and Energy Trust rebate paperwork in a single visit. That is the everyday reality for our NATE-certified team.

4.9★ Rated by Over 1,200 Hillsboro Customers
45–90 Minute Arrival in Hillsboro
Gas & Electric Furnace Specialists

Hillsboro Neighborhoods We Keep Warm

Hillsboro is a city of contrasts—from LEED-certified smart homes near the MAX line to 1970s ranches surrounding Brookwood Elementary. We service every neighborhood with furnace expertise tuned to local conditions:

Orenco Station

The modern townhomes and lofts in Orenco Station typically run 95%+ AFUE modulating furnaces tied to smart thermostats and zoning controls. We routinely troubleshoot communication issues between thermostats, pressure switches, and ECM motors—especially when firmware updates or power blips trigger diagnostic codes. Our technicians bring combustion analyzers and manufacturer software to keep these high-efficiency systems performing.

Tanasbourne

Mixed commercial-residential developments in Tanasbourne abide by HOA rules for vent terminations and equipment screening. Builder-grade furnaces installed in the 2000s are hitting the 10–12 year mark, and many struggle with clogged condensate traps and undersized returns. We work with HOA boards to meet venting requirements while upgrading homeowners to reliable, efficient heating.

Brookwood & Jackson School

Established 1980s and 1990s neighborhoods like Brookwood and Jackson School are filled with furnaces approaching the end of their service life. Many homeowners are ready to upgrade to Energy Trust qualifying 95% AFUE systems. We also see duct insulation failures and leaky supply trunks that we correct as part of a comprehensive retrofit plan.

Intel Campus Area & Reedville

The housing stock surrounding the Intel campus ranges from 1970s Reedville ranches to newly constructed communities. We service everything from 80% AFUE atmospheric furnaces to variable-speed Carrier Infinity systems. Our team carries both legacy parts and advanced diagnostics to handle the full spectrum of heating equipment in this corridor.

Downtown Hillsboro

Historic properties and retrofit projects near downtown Hillsboro and the civic center often require creative heating solutions. We install ductless heat pumps in heritage buildings, integrate furnaces with existing hydronic systems, and coordinate with the City to meet preservation guidelines while keeping offices and lofts comfortable.

Hillsboro Homeowners Trust Our Furnace Pros

"Our Orenco Station townhome dropped to 52°F during a December cold snap when the furnace locked out. Efficiency Heating diagnosed a failed pressure switch and cleaned the inducer assembly the same afternoon. They even synced our smart thermostat so the zoning system runs more evenly. Exceptional service for high-tech homes."

— Megan L., Orenco Station, Hillsboro

"We've counted on Efficiency Heating for five winters in Tanasbourne. Their technicians understand the HOA venting limits and keep our modulating furnace tuned. When a zone damper stuck last January they had the part on the truck and balanced our three-story townhouse within hours."

— Bryan S., Tanasbourne, Hillsboro

Recent Hillsboro Furnace Repair Success

Location: Three-story townhome near Orenco Station MAX line

Problem: The homeowner woke up to 52°F indoor temps during a December cold snap. The 2012 Carrier 96% modulating furnace displayed a pressure switch error and would not complete ignition. Condensate pooling in the trap further complicated the restart.

Solution: Our technician arrived in under 2 hours, verified the pressure switch fault, and removed blockage caused by moisture in the condensate assembly. We replaced the pressure switch, cleaned the inducer motor housing, cleared the trap, and recalibrated the smart thermostat to stage heat appropriately for the three levels.

Result: Heat was restored within 3 hours of the initial call. The homeowner gained confidence knowing we also caught a failing condensate pump before it caused secondary damage. The system now runs balanced across all floors, and we enrolled the homeowner in annual maintenance to prevent future downtime.

Hillsboro Permits, Rebates & Utility Coordination

Permit Coordination

  • City of Hillsboro Building Division

    150 E Main Street, Hillsboro, OR 97123

    Phone: (503) 681-6100

    We pull permits, schedule inspections, and ensure code compliance.

  • HOA Requirements

    Tanasbourne and Orenco Station HOAs enforce vent placement and exterior appearance rules. We coordinate approvals before work begins.

Rebates & Utility Programs

  • Energy Trust of Oregon

    $500–$1,500 incentives for 95%+ AFUE furnaces plus duct sealing up to $500.

  • Smart Thermostat Rebates

    PGE offers $75–$150 rebates for qualifying thermostats—ideal for multi-zone homes.

  • Utility Coordination

    We work with Portland General Electric and Northwest Natural Gas to verify service requirements.

Our office handles rebate paperwork, photo documentation, and submission timelines so you get every available incentive.

Common Hillsboro Furnace Repairs

From smart thermostat integrations near the MAX line to classic 1990s furnaces in Brookwood, Hillsboro homeowners call us for these heating issues most often:

Smart thermostat integration
Frequent in Orenco Station tech homes with zoning
Typical cost: $150-$400
Ignition control failures
High humidity winters stress ignitors and boards
Typical cost: $250-$500
Pressure switch failures
Condensate drainage issues in high-efficiency furnaces
Typical cost: $200-$400
Flame sensor cleaning/replacement
Most common service call across Hillsboro
Typical cost: $200-$350
Condensate pump failures
Multi-level homes require proper drainage
Typical cost: $200-$400
Inducer motor replacement
10-15 year old systems near Intel campus
Typical cost: $400-$700
Heat exchanger cracks
Older Brookwood and Reedville furnaces
Typical cost: $800-$1,500
Zone damper repairs
Three-story Orenco and Tanasbourne townhomes
Typical cost: $300-$600

Hillsboro Furnace Repair FAQs

How quickly can you reach Hillsboro for furnace repair?

We maintain westside standby crews that reach Hillsboro neighborhoods in 45–90 minutes. On freezing nights we triage no-heat emergencies and provide 24/7 support so your family isn’t left in the cold.

What furnace problems are most common in Hillsboro?

In Orenco Station we often troubleshoot smart thermostat communication and zoning issues. Tanasbourne homeowners call us for pressure switch and condensate problems, while Brookwood residents face aging heat exchangers and blower motors approaching end-of-life.

Do I need a permit for furnace replacement in Hillsboro?

Yes. We obtain permits from the City of Hillsboro Building Division (503-681-6100), coordinate inspections, and ensure compliance with local mechanical codes and HOA guidelines.

Which Hillsboro neighborhoods do you serve?

Everywhere from Orenco Station and Tanasbourne to Brookwood, Jackson School, Reedville, the Intel campus area, and historic downtown. We tailor solutions to each neighborhood’s architecture and heating demands.

Are there Energy Trust rebates for Hillsboro furnace upgrades?

Absolutely. Qualifying 95%+ AFUE furnaces earn $500–$1,500 Energy Trust incentives, plus smart thermostat rebates. We manage the paperwork to ensure you receive the full benefit.

Transparent Furnace Repair Pricing for Hillsboro Homes

Whether you live in a modern Orenco townhome or a classic Brookwood ranch, you deserve straightforward pricing. We waive diagnostic fees with repairs and quote every job before we begin.

Diagnostic Service Call (Hillsboro)
$95-$150
Waived with approved repair
Ignition Control Repair
$250-$500
Common during damp winter weather
Pressure Switch Replacement
$200-$400
Frequent in high-efficiency furnaces
Flame Sensor Cleaning/Replacement
$200-$350
Rapid turnaround with stocked parts
Inducer Motor Replacement
$400-$700
Includes testing and vent inspection
Heat Exchanger Evaluation
$800-$1,500
Includes combustion analysis and camera inspection
Zone Damper or Control Board Repair
$300-$700
Essential for multi-level townhomes
High-Efficiency Furnace Replacement
$3,900-$6,800
Includes permitting and Energy Trust paperwork

Need Other Westside HVAC Services?

In addition to same-day furnace repair in Hillsboro, we also provide AC repair in Hillsboro. Serving nearby? Explore our Beaverton furnace repair, Tigard furnace services, and Portland metro furnace repair.

No Heat in Hillsboro?

Don't freeze in Orenco Station or Tanasbourne!

Our NATE-certified technicians serve Hillsboro 24/7 for emergency furnace repairs

Emergency Line: (503) 698-5588

Average response time to Hillsboro: 45-90 minutes

Hillsboro Furnace Service

45–90 Min Response
Smart Thermostat Experts
Permits & Rebates Handled
Emergency Service Available
Serving Hillsboro Since 2008

Common Hillsboro Service Areas

Orenco Station | Tanasbourne

Brookwood | Reedville | Downtown

We Service Hillsboro, OR

Need Furnace Repair in Hillsboro? Let’s Get Your Heat Back On.

Orenco Station townhome or Reedville ranch—we bring fast diagnostics, Energy Trust expertise, and friendly technicians who respect your home.

Our Portland Metro Locations

Portland

4409 SE 24th Ave, Suite 35

Portland, OR 97202, USA

Milwaukie

14913 SE Kellogg Ave

Milwaukie, OR 97267, USA

Happy Valley

8305 SE Monterey Ave #220J

Happy Valley, OR 97086

Licensed
Bonded
Insured
NATE Certified
BBB A+
Financing Available
100% Satisfaction
24/7 Service