Efficiency Heating & Cooling

Efficiency Heating and Cooling Company
Navigation Menu

Home Cooling Products

Residential Cooling Solutions

bryant air conditioner1 1

Central Air Conditioning Systems

An air conditioner has one primary job, and that is to compress refrigerant which chills it. The chilled refrigerant is then pumped inside to the indoor coil, and warm air from the home is forced through the coil. The refrigerant removes heat energy from the air, and the now heated refrigerant is sent back outside to the air conditioner and the process repeats.

evolution variable speed heat pump model 288BNV

Heat Pumps

A heat pump looks similar to an air conditioner, and acts just like one during the summer when you need to cool your home. However, when cooler weather hits Portland, a heat pump can also reverse the cooling process and heat your home! This is done by extracting heat energy from the air outside, and using that to warm the air inside. Even when outside air is cool, there is still heat energy in it.

evolution heat pump with basepan heater model 38MPRA

Ductless Mini-Split Heat Pump

Ductless mini-split systems are a flexible solution for room additions or locations where duct work is not feasible. With a Mini Split it is possible to cool a room or an entire home. Indoor mini-splits units can be installed high on the wall, in the ceiling or near the floor.

bryant ecoil 1

Evaporator Coils

Without one of these, your air conditioner would be completely useless. An air conditioner chills refrigerant, and pumps the refrigerant inside to the indoor coil. If you heat with a furnace, the indoor coil is contained in the evaporator coil. Warm air from the home is forced through the chilled coil. The coil absorbs heat energy from the air, and also dehumidifies it because water condensates on the coil.

How Does the Most Common Residential
Cooling Solution Work?

You understand your cooling system keeps your house or business cool in the hot summer season, however have you ever questioned how it works? One fascinating truth you may not understand is that your AC system and your home refrigerator work using the very same methods. The distinction is your fridge cools a little, insulated area, and an air conditioning unit keeps your house, workplace, or business area at a comfy temperature level.

Air conditioning units are one part of a main heating and main cooling system that draws heat from beyond the house and transfers it to another location.

Basically, the AC system in both a home and service is a main heating & cooling system that supplies cool air through the sheet metal ductwork by offering by means of a procedure that extracts the warm air inside, eliminating its heat, which is changed by the cooler air.

The whole procedure of making the air in your home a comfortable temperature level is based upon a really easy clinical concept, and the rest is accomplished by mechanical ways.

An A/C system utilizes chemicals that transform from gas to liquid and back once again rapidly. These chemicals move the heat from the air inside your home to the outdoors air.

The air conditioner system has 3 essential parts. These are the compressor, the condenser, and the evaporator. Your system’s compressor and condenser are normally situated in the outdoors part of the a/c system. Inside your home is where you will discover the evaporator.

The cooling fluid reaches the compressor as a low-pressure gas. The compressor squeezes this gas/fluid, and the particles in the liquid are jam-packed better together. The closer the compressor forces these particles together, the greater the temperature level and energy increase.

 

 

How Your Home Cooling Solutions Remove Hot Air

This working fluid exits the compressor as a high-pressure, hot gas, and it relocates to the condenser. The outdoors system of a cooling system has metal fins all around the real estate. These fins work like the radiator on an automobile, and they assist dissipate heat faster.

When the fluid leaves the condenser, it is much cooler. It’s likewise altered from a gas to liquid since of the high pressure. The fluid makes its method into the evaporator through a small, narrow hole and when the liquid reaches the opposite of this passage, its pressure drops. When this occurs, the fluid starts to vaporize to gas.

As this takes place, the heat is drawn out from the surrounding air. This heat is needed to separate the particles of the liquid into a gas. The metal fins on the evaporator likewise assist exchange thermal energy with the surrounding air.

When the refrigerant leaves the evaporator, it is as soon as again a low-pressure, cooled gas. The procedure begins all over when it returns to the compressor. There is a fan that’s linked to the evaporator, and it distributes air around the within the residential or commercial property and throughout the fins of the evaporator.

The a/c draws air into the ducts through a vent. This air is utilized to cool gas in the evaporator, and as the heat is eliminated from the air, it’s cooled. Ducts then blow air back into your house.

This procedure continues up until the indoor air of your house or business reaches the ideal temperature level. When the thermostat senses that the interior temperature level is at the wanted level, it shuts the air conditioning unit off. When the space warms up once again, the thermostat turns the air conditioning system back on up until the favored ambient temperature level is accomplished once again.

Click to Call: 503.698.5588

We Strive to Be One of the Best Local HVAC Companies in the Area!

Efficiency Heating & Cooling is an AC installation company near me, gas furnace installation company near me, and heat pump installation company near me.

Efficiency Heating & Cooling employs only the best technicians for air conditioner repair, furnace repair, and ductless AC repair. We offer heating and cooling company services and replace all air conditioners, natural gas furnaces, electric furnaces, air handlers, fan coils, ductless systems, and heat pumps.

If you want to work with a certified HVAC company, then contact us today.

Contact us now with any questions or to schedule and appointment!

We Strive to Be One of the Best Local
HVAC Companies in the Area!

Efficiency Heating & Cooling is an AC installation company near me, gas furnace installation company near me, and heat pump installation company near me.

Efficiency Heating & Cooling employs only the best technicians for air conditioner repair, furnace repair, and ductless AC repair. We offer heating and cooling company services and replace all air conditioners, natural gas furnaces, electric furnaces, air handlers, fan coils, ductless systems, and heat pumps.

If you want to work with a certified HVAC company, then contact us today.

Contact us now with any questions or to schedule and appointment!

 

Click to Call: 503.698.5588

Address:   4040 SE International Way
STE E105 Milwaukie, OR 97222

Hours:   Mon – Fri: 7AM – 6PM
Sat – Sun: by Appointment

CCB#   187834

Book Now