How to install a gas furnace is a question that most of us have at some point in time. But then again, not all of us have the money to pay for professional service providers who can help us install it properly. Some may not have the knowledge or skills to do it either. So, what are your options if you want to learn how to install it on your own? Here are some tips that may help:
Get some good DIY instruction on how to install a gas furnace. You can easily find this over the Internet. The instructions that come in manual form will be concise and very easy to understand. If you have any doubts, you can always consult a technician or someone who knows how to do it. This way, you can be sure that the process is done correctly.
Make sure that you have all the tools and equipment that you need before you start installing a gas furnace. This includes a power supply, an electric blanket, a gas heater, a venting system, a filter, a furnace blower, and a heat exchange system. These items can easily be found in local appliance stores. And if you don’t have any of them, then you can easily find one by going online.
Before you install a gas furnace, make sure that it is turned on and operational. This is needed because you won’t know how to install a gas furnace without it being operational first. And since you won’t know how to operate it without it being operational, it is very important that you have a working furnace first before you begin the installation process.
The first thing that you need to do is turn off the main power source of your home. It is best to isolate the area where you plan to install the furnace so that any potential electrical problems can be attended to. Most furnaces are powered with electricity, so this should not be a problem. However, you still need to turn it off because some furnace systems require the presence of a gas supply.
Next, you need to secure the area where you will install the furnace. Make sure that the blower is attached in the proper way. If it is not securely fastened, it could potentially blow the gas into the room if you are not careful. Also, check to make sure the blower is attached to the appropriate gas valve so that the blower can’t accidentally turn off the gas valve while you are installing the furnace.
Then, the blower is connected to the gas valve. The blower will allow the existing air in the room to be replaced with the hot air from the furnace. The gas valve and the venting system will be installed next.
Make sure that the furnace is turned on before you begin installing. This is particularly important if you are changing to an energy efficient furnace. Otherwise, you may risk turning the furnace on while you are working. Finally, follow the installation directions carefully. You do not want to damage your furnace or injure yourself.
Check your gas and electricity sources to ensure they are functioning properly. If the blower doesn’t work, you should first try to find the source of the problem. You may need to have the power shut off at the breaker box. If that doesn’t work, you may have to have the gas and electricity shut off at the same time. Be sure to disconnect the furnace before you do this.
Next, you should install the furnace. Your previous design should be compatible with the venting system of the new furnace. If not, there are many manufacturers who can help you locate the venting system that works for your specific model. If you have to buy a new furnace, you should get one that has a manual setting for venting.
With the venting in place, you should run a sprayer over the entire inside of the room to fill the gaps. Then attach the blower to the gas main valve. Adjust the blower so that it evenly distributes the heat throughout the entire room. Turn the furnace on and test it to make sure it is working properly.
Finally, you should set everything up so that when you turn it on it heats the room uniformly. Adjust your thermostat to your desired temperature and test it again. You should have minimal problems, if all of these steps are followed. When you consider how to install a gas furnace, you will see that it can be easy and don’t require a lot of special equipment or skills. In fact, installing this type of system is better done by furnace installation experts who have experience doing it.
