What do you do when your oil furnace stops working?

What do you do when your oil furnace stops working?


If you are wondering what to do when your oil furnace stops working, the first thing to do is to check your tank. It is critical to check the level of oil. If it is low, you should call a service provider to arrange a delivery. Alternatively, if your heating system is automated, it will automatically deliver the necessary amount of fuel to your home. If the oil valve is closed, no flame will be detected, and the furnace will shut down.

Next, check the bleeder valve. It is located on the side of the fuel pump, but is not connected to anything. If you notice an excess amount of fuel in the chamber, you can clean it by removing the oil filter. You can also connect a plastic bottle to the bleeder valve. The bottle must have a capacity of at least one liter of fuel. To begin bleeding, turn on the furnace and turn the bleeder valve a half-turn. Be sure to shut off the gas supply or oil supply to prevent overflow. Then, enjoy the warmth of your home!

If you find that you cannot start your furnace after pressing the bleeder valve repeatedly, it may be due to a malfunction in the oil pump. Make sure that you clean the bleeder valve regularly and do not force it open by repeatedly pushing it. This will only increase the fuel level in the chamber, which could result in a fire or explosion. In order to avoid any of these scenarios, you should call a professional.

Once the bleeder valve has been bled, you should press the reset button once or twice to start the furnace. Do not press the button too many times because you risk overloading the furnace with fuel. You could also burn yourself or damage your furnace by pressing the reset button too many times. If you can get the oil flowing again, your furnace should start working. You can now set your thermostat to the desired temperature and enjoy the warmth of your home.

If you’ve already bled the tank, you should have a bleeder valve. A bleeder valve is located on the side of the fuel pump and isn’t connected to anything. A drip pan is a good option. A plastic bottle of at least 1 liter of fuel is another option. You should keep the bloeder valve closed until the furnace has been bled.

If you’ve checked the oil tank, the reset button should be in the same place as the bleeder valve. If you’re still unable to do so, try pressing the bleeder valve on the furnace’s side. The bleeder valve is located on the side of the fuel pump. You can also remove the tubing from the oil furnace. It will be necessary to clean the container after the bleeding process.

First of all, check the oil tank. Ensure that the burner is turned on and that the fuel is not running out. If the furnace does not work, you can also reset it manually by pressing the reset button and wait for the furnace to start. If you can’t find a solution to your oil furnace’s problem, you should call a repair service. Once you’ve done this, you can then return the oil to your home and begin bleeding.

Check the oil tank. If the tank is empty, the fuel pump should be running. You should have a full tank of fuel. If your furnace isn’t working, you should also check the oil hose and in-line filter. When these steps have been performed, you should now wait for your furnace to start working again. If the furnace is still not working, it’s time to call a professional.

If the tank doesn’t contain fuel, check the filter. A filter is a vital part of your oil furnace. When it’s full, it won’t make it very efficient. It should also have a high-quality air-filter, so it can help you avoid a dangerous situation. A dirty filter should be cleaned regularly. Depending on the type of fuel used, you may need to change the nozzle. Occasionally, the in-line filter should be replaced.


Click to Call: 503.698.5588

Our Locations

14913 SE Kellogg Ave
Milwaukie, OR 97267, USA

Connect With Us

Hours:   Mon - Fri: 7AM - 5PM
Sat - Sun: by Appointment
CCB# 187834

4409 SE 24th Ave, Suite 35
Portland, OR 97202, USA

Book Now